20 Minutes
Flight Time
40K Lumen
Oblique Lighting
True 4K + IR
Camera
FLIR 160x120px @ 9fps
Infrared Camera
LiDAR
Payload
Gas
Detector
The ASIO X Drone revolutionizes confined space inspections by offering a safer, faster, and more cost-effective solution. Equipped with a patented Electromagnetic tilting system and advanced sensors, it ensures stability and precision in tough environments. Built from carbon fiber and aerospace-grade composites, it’s durable and easy to operate. Featuring RGB and IR cameras, 3D Lidar, and more, the ASIO X allows inspectors to assess hazardous areas remotely, enhancing safety and compliance while boosting operational efficiency.
Request quoteFlight Time
Oblique Lighting
Camera
Infrared Camera
Payload
Detector
The ASIO drone comes equipped with an advanced gas detection payload, allowing you to safely and quickly identify and monitor hazardous gases in confined spaces. This feature is crucial for protecting your workers and ensuring their safety. The gas detection payload includes an array of highly accurate sensors capable of detecting a wide range of hazardous gases, such as Hydrogen Sulfide (H2S), Carbon Monoxide (CO), and Oxygen (O2). With these sensors, you can be confident that you’re receiving the most precise data available.
Locates and Quantifies Four Gases: Methane (CH4), Hydrogen Sulfide (H2S), Oxygen (O2), and Carbon Monoxide (CO).
Intervenes Swiftly: The drone enables rapid response to potential hazards, ensuring the safety of your staff.
Ensures Better Situational Awareness: Enhances asset monitoring and maintains a safer working environment for humans.
The ASIO drone features a state-of-the-art LiDAR system, delivering real-time 3D mapping of inspection areas. This technology enables the creation of precise and detailed environmental maps, essential for planning, navigation, and data analysis. The integrated LiDAR system adheres to the highest standards, ensuring you receive the most accurate information available.
Key Features:
Create Accurate 3D Maps: Generates precise 3D representations of inspected confined spaces.
Digitize Assets: Enables asset localization and defect measurement.
Leverage Insights: Provides unprecedented insights into assets, promoting safer operations.
Keep control of your entire operations
Observe even the tiniest detail
Efficient & safe inspections for difficult-to-reach industrial assets
When flying in confined spaces, or out of sight, the risk of coming into contact with surfaces is high. ASIO X has been designed with advanced materials to resist collisions. The protective cage ensures contact with the environment or with the cage itself has the highest level of safety.
ASIO X lightweight design (below 100g), is built with advanced materials to ensure optimal resistance when it comes into contact with the environment. These materials include a combination of advanced polymer composite used in the automotive industry and defence-grade strings, enabling a long-life for your investment. And even in the event of an incident, the cage replacement is quick and easy so you can get back to your operation in a matter of minutes.
Flybotix’s patented propulsion system is built around two large coaxial and reclining propellers allowing extended flight time (up to 24 minutes), reduced noise level (only at 80dB at 1m) and redundancy. ASIO’s coaxial rotor technology ensures a redundancy in the control and propulsion systems, safely landing the drone in case of an incident.
ASIO X integrates more than a dozen sensors to measure attitude and position 8000 times per second, making it perfectly stable in the most challenging environments, without the need of GPS.
Pilots can also adjust the horizontal speed with a single joystick thanks to the wall-lock algorithm, which maintains a constant distance to the wall and the altitude of the drone.
Additionally, the indoor drone can follow its path backwards, and smoothly land via its rewind algorithm and auto-landing button respectively. Its obstacle repulsion simulates an invisible sphere surrounding ASIO and continuously analyzes the environment to automatically avoid collisions. The Safety slowdown feature ensures ASIO can stop before touching an obstacle, even during max speed.
Featuring a 4K resolution (3840×2160 pixels) camera, the indoor drone allows you to spot the tiniest details in true colours and to capture 12 megapixels pictures directly during the flight.
You can also spot defects that would otherwise be undetectable thanks to its infrared sensor thermal camera.
The 40,000 lumen luminous power, can make the darkest places as clear as daylight, and the live-streaming feature provides you with full control of your operation. You can also store all data on board, in full definition, and on an ultra-fast micro SD card.
ASIO X, and its 12+ advanced sensors work seamlessly to measure altitude and position at 8000 times per second. This allows you to navigate and operate with high precision, even in GPS-deprived environments.
ASIO is the ideal solution for inspecting indoor, industrial and confined environments; such as the inside of a wind turbine blade, a hydropower penstock, wastewater sewers, storm sewers, drainage systems, tanks, and much more.
1 x ASIO Drone Unit
3 x ASIO Battery packs and safety transport bags
2 x Spare pairs of propellers
1 x Safety vest
Pre-flight and post-flight checklist
2 x 64GB microSD Card (U3)
1 x 2.4 GHz Remote Controller
ASIO Range extender (optional)
Spare cage (optional)
Battery charger
12 months warranty and standard support
1 x Transport box
ASIO Explore
| Attribute | Details |
|---|---|
| Configuration | Dual coaxial propellers |
| Flight time | Up to 20 minutes |
| Motors | 2 brushless motors |
| Propellers | Two propellers, Ø13” |
| Tilt system | Patented Electromagnetic tilting system (no swashplate, no servomotor) |
| Max speed | Assisted: 1 m/s (3.2 ft/s) Manual: 5 m/s (23 ft/s) |
| Navigation LEDs | 2: red (port), green (starboard) |
| Lighting LEDs | 8 panels |
| Dimensions | Ø450mm, H315mm (Ø17.7”, H11.6”) |
| Wind speed resistance | Up to 3 m/s (10 ft/s) |
| Payload sensors | 1x RGB 4K camera, 1x IR camera, 1 x Luminosity sensor, 1x 3D Time of Flight (ToF) Lidar, 1x Radar |
| Payload tilt | 180° (±90°) |
| Materials | Carbon fiber, aerospace grade composites, 3D printed thermoplastics |
| Sensors | 3x IMUs ( 1 High-grade + 1 fallback), 1x magnetometer, 1x barometer, 6x distance sensors, 6x optical flow sensors, 1x radar, 2x global shutter cameras (VIO) |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Operating frequencies | 2402 – 2480 MHz |
| Weight | 1.150kg (2.53 lbs) EIRP < 20 dBm |
| Noise level | Hover: 80dB @ 1m (3.2 ft) |
| Protection | Dust and water projections |
| Control algorithms | Flight stabilization, Height Lock, Wall Lock, Tube Lock, Recovery, Rewind, Autoland |
| Certifications | CE, FCC |
| LEDs intensity | Up to 32000 Lumen |
| Data storage | Onboard SD card (FAT32 format) |
| Attribute | Details |
|---|---|
| Screen size | 5.5” |
| Connectivity | microUSB, Wifi 2.4GHz |
| Screen mirroring | Yes |
| Operating frequencies | 2402 – 2480 MHz |
| Joysticks | 1 (2 for drone and 1 for payload) |
| EIRP | < 20 dBm |
| Weight | 515 g (18 oz) |
| Battery life | 4 h |
| Operating temperature | 0°C to 45°C (32°F to 115°F) |
| Battery capacity | 4950 mAh |
| Resolution | Full HD (1920 x 1080 px) |
| Attribute | Details |
|---|---|
| Battery type | Lithium Polymer (LiPo) |
| Nominal voltage | 19 V |
| Energy | 74.1 Wh |
| Capacity | 3900 mAh |
| Charging time | 1.10 h (100%), 40 min (80%) |
| Storage temperature | -25°C to 35°C (-13°F to 95°F) |
| Plane transportation | Approved for carry-on luggage |
| Safety transport bag | Yes |
| Life Time | 100 charge cycles |
| Attribute | Details |
|---|---|
| Sensor type | CMOS Rolling shutter |
| Sensor size | 1/2.3” |
| Sensor resolution | 12.3 MP |
| Still pictures resolution | 4056 x 3040 px |
| Video recording | 4K: 3840×2160 px, 30 fps |
| Video streaming | 720p, 30 fps |
| Formats | Video: MP4; pictures: JPG |
| Effective resolution | 0.2mm at 30cm (1ft) |
| Field of view | 153° diagonal, 121° horizontal |
| Depth of field | 30cm (1ft) to infinity |
| Attribute | Details |
|---|---|
| Sensor type | FLIR Lepton 3.5 (radiometric) |
| Sensitivity | <50 mK |
| Sensor resolution | 160×120 px |
| Wavelength | 8μm to 14μm |
| Field of view | 71° diagonal, 57° horizontal |
| Data recording | MP4 video, 9fps |
| Temperature range | -10°C to 400°C (14°F to 750°F) |
| Attribute | Details |
|---|---|
| Maximum upwards inclination | +90° |
| Total FOV | 273° vertical, 121° horizontal |
| Frontal view | 93° diagonal, 121° horizontal |
| Stabilization | Active Pitch stabilization, Passive vibration damping |
| Unobstructed FOV | Vertical: 185°, Horizontal: 121° at pitch 0°, 50° at pitch ±90° |
| Attribute | Details |
|---|---|
| Max luminosity | 40,000 lumen |
| LED light temperature | 4000K, CRI 70 |
| Dimmable | 0-100% (levels > 20% available in strobe mode) |
| Orientation | Left / right / up / front / down (dimmed by software) |
| Nominal power | 2x 15W (eq. 3min flight time reduction) at 100% |
| Attribute | Details |
|---|---|
| VIO camera type (2x) | Mono Global shutter RGB |
| POV | 150° diagonal, 127° Horizontal, 172×127 combined |
| Resolution | Up to 1280 x 800 px |
| 3D LiDAR | |
| 3D LiDAR FOV | 106° x 86° |
| 3D LiDAR range | 0.1 – 7m |
| 3D LiDAR framerate | 5 fps |
| Attribute | Details |
|---|---|
| Dimensions | 66x54x39 cm3 |
| Empty weight | 11.5 kg |
| Total weight | 16 kg |
Give us a call or drop by anytime, we will answer all enquiries within 24 hours on business days. We will be happy to answer your questions.
We would love to hear from you! Our team is always here to help.
+1 866 300 9012
contact@measur.ca
Vancouver, British Columbia Calgary, Alberta Mississauga, Ontario Montreal, Quebec